Extron electronics DTP DVI 330 Guide de l'utilisateur télécharger pdf (Page 16)

DTP HDMI 330 Tx/Rx Transmitter and Receiver • Reference Information 10

Reference

Information

This section provides procedures for mounting the DTP HDMI 330 Tx/Rx transmitter and

receiver and disconnecting the ground between them.

• Mounting the Transmitter or Receiver

• Disconnecting the Ground

Mounting the Transmitter or Receiver

ATTENTION:

• Installation and service must be performed by authorized personnel only.

• Avoid ground potential differences between the transmitter and receiver installation

sites, which can lead to equipment damage or a missing or unstable picture. If

a potential difference cannot be avoided, remove the ground connection between

the units and locally power both units (see Disconnecting the Ground on the

next page).

The 1‑inch high, quarter rack width DTP HDMI 330 transmitter or receiver can be placed

on a table, mounted in a rack, or mounted under a desk or table. The receiver can also be

mounted on a projector bracket.

Tabletop Use

Affix the included rubber feet to the bottom of the unit and place it in any convenient

location.

Mounting kits

Mount the unit using any optional compatible mounting kit listed on the Extron website

(www.extron.com), in accordance with the directions included with the kit. For rack

mounting, see UL Rack-Mounting Guidelines on the next page.

1 2 ... 11 12 13 14 15 16 17 18 19

Pas de commentaire

Extron electronics DTP DVI 330 Guide de l'utilisateur Page 16