Extron electronics Twisted Pair Transmitter VTT001 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour motos Extron electronics Twisted Pair Transmitter VTT001. Setup Guide - VTT001 and VTR001 Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
This card provides quick start instructions for an
experienced installer to set up and operate the VTT001
and VTR001.
Step 1 — Powering down
Power off all devices and disconnect them from the power source.
Step 2 — Connecting to the UTP cable
Connect the RJ-45 connectors of the transmitter
and receiver to either end of the UTP cable.
Terminate the cables using the same standard as
shown to the right.
Step 3 — Connecting input/output
devices
Using the 15-pin front panel HD connectors,
attach RGBHV/RGBS input to the transmitter and
a display output to the receiver (see the example
application diagram below).
Step 4 — Connecting the power supply
Connect the external power supply to the power input(s) of the transmitter,
or the receiver, or to both, then plug the power supply into the AC power
source and power on the transmitter/receiver modules and the input/output devices.
N Both transmitter and receiver have remote power capability. For
transmission distances up to 300 feet, the power is required at either
the transmitter or the receiver. Greater distances require power to be
applied locally to both the transmitter and the receiver.
Step 5 — Adjusting sharpness
For the VTR001 series, set the sharpness control located on top of the
receiver. See the illustration on the right.
Turning the control clockwise increases sharpness and turning it
counterclockwise decreases sharpness.
5
Pin
1
2
3
6
7
8
4
Wire color
White-green
NOTE If you are using Enhanced
Skew-Free™ A/V cable, use th
e
TIA/EIA T568A standard only.
Green
White-orange
White-blue
Orange
White-brown
Brown
Wire color
T568A T568B
White-orange
Orange
White-green
White-blue
Green
White-brown
Brown
Side
Blue Blue
Insert
Twisted Pair
Wires
Pins:
1 2345678
RJ-45 Connector
LCD Projector
Extron
Skew-Free
A/V UTP
Cable
(up to 500')
Laptop
Extron
VTT001 MAAP
Tw isted Pair Tr ansmitter
Extron
VTR001 MAAP
Tw isted Pair
Receiver
Extron
CPM101
Mounting Frame
Extron
CPM101
Mounting Frame
POWER
OUTPUT
VTR00 1 M AA P
POWER
VIDEO INPUT
VTT 001 MAA P
Setup Guide — VTT001 and VTR001
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
68-760-50
Rev. A
01 09
OUTPUT
VT R00 1 M AA P
SHARP
Sharpness
Vue de la page 0
1

Résumé du contenu

Page 1 - Mounting Frame

This card provides quick start instructions for an experienced installer to set up and operate the VTT001 and VTR001. Step 1 — Powering downPower of

Commentaires sur ces manuels

Pas de commentaire