Extron electronics FOX T USW 103 Manuel d'utilisateur télécharger pdf

Extron FOX T USW 103 Fiber Optic Transmitter with Integrated Switcher • Specifications 1

Specifications

FOX T USW 103

NOTE: The FOX T USW 103 is not compatible with the FOX 3G HD-SDI, FOX 3G DVC, or FOX AV models.

NOTE: These units are class 1 laser products. They meet the safety regulations of IEC-60825.

NOTE: *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.

Optical fiber interconnection between transmitter and receiver

Number/type .................................. 1 or 2 fiber optic

Connectors .................................... 2 LC connectors

Operating distance

Singlemode ............................. 30 km (18.75 miles) with singlemode (SM) cables with a SM unit

Multimode ............................... 300 m (984') with 62.5µm OM1 multimode (MM) cables with a MM unit

1 km (3280') with 50µm OM2 multimode (MM) cables with a MM unit

2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized

multimode cable with a MM unit

NOTE: Operating distance is approximate.These are typical maximum distances that may vary depending on

factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion,

environmental factors, and kinks.

Nominal peak wavelength

.............. 850 nm for MM units, 1310 nm for SM units

Data rate ........................................ 4.25 Gbps

Maximum pixel clock ...................... 165 MHz

Transmission power

Singlemode ............................. -5 dBm, typical

Multimode ............................... -5 dBm, typical

Maximum receiver sensitivity

Singlemode ............................. -18 dBm, typical

Multimode ............................... -12 dBm, typical

Optical loss budget

Singlemode ............................. 13 dB, maximum

Multimode ............................... 7 dB, maximum

Video

Digital

Resolution range

..................... 640x480 up to 1920x1200, 480p, 576p, 720p, 1080i, 1080p @ 60 Hz sampled

pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz undersampled

Formats

................................... RGB and YCbCr digital video

Standards ................................ DVI 1.0, HDMI compliant, HDCP 1.1, CEA-861E

Analog

Maximum resolution

................ Up to 1920x1200 or 1080p @ 60 Hz pixel for pixel

Signal type .............................. VGA-UXGA RGBHV, RGBS, component video

Gain ........................................ Unity

Pixel data bit depth .................. 8 bits per channel, 3 channels (R, G, B; or YUV)

THIS TEXT WINDOW and its contents are for reference only. Delete this material before

finishing and releasing the specs sheet.

 For manuals (guides), use the standard Section style from the current user guide

template instead of Chapter title, specs sheet or Heading 1, specs stand-alone;

use Heading 1 as usual for “Specifications” if the specs are part of a multitopic chapter.

 Click the text tool where you want to insert the specs table, select the specs table

container paragraph style, then paste in the specs table from the stand-alone master

specs sheet.

 For specifications from template v7.6 or earlier, use this guide to which new paragraph

style replaces which old style:

 Specs8_Heading 2 replaces SpecsSubHdr

 Specs8_L1 “ Specs7

 Specs8_L1 cont’d “ Specs7A

 Specs8_L2 “ Specs7 subcategory

 Specs8_L3 “ Specs7 sub-subcategory

 Specs8_Note “ SpecsNote7

 Specs8_Warning/Caution “ Specs7Warning/caution

 Specs8_ Revision code “ Revision code

 The other new styles are required for proper table placement/formatting (one for the

entire specs table as placed within a manual section [specs table conteiner], two others

[Specs8_Note L1 table and Specs8_Note L2 table] for the note/caution cells within

the specs table).

 At this time, the notes, cautions, and warnings boxes/tables within specs have to

be hand inserted and merged and formatted. Use the existing table styles (NOTE,

Caution, and Warning1) for the table boxes.

 Apply the Specs8_Note L1 table or Specs8_Note L2 table paragraph style

(depending on the content to which the note, caution, or warning applies) to the

nested note, caution, or warning table. Also apply the Specs8_Note cell insets

cell style to the cell containing the note, caution, or warning nested table.

 Apply the Specs8_Note or Specs8_Warning/Caution paragraph style to the text

within the nested note, caution, or warning table.

 Apply the Specs8_note cell inset cell style to the specs table cell containing the

nested table.

For use with user guides (manuals) only (but NOT for stand-alone specs sheets), two

bulleted note styles are available to use when you combine a series of notes into one note

table:

 Specs8_Note_bulleted — This is for the first paragaph, and you have to manually

insert the bullet character and second tab.

 Specs8_Note_bulleted, cont'd — This is for susequent paragaphs within a note

box. The bullet character is automatically inserted.

Here is an example of how those two styles are used:

NOTES: • This is just test text to show the style. You wouldn't normally put completely unrelated

topics together in a shared note.

All nominal levels are at ±10%. UL rated for use in plenum airspaces: meets UL 2043

for heat and smoke release, excluding the power supply; meets UL 60950 for safety.

UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release,

excluding the power supply; meets UL 60950 for safety.

• Specifications are subject to change without notice. UL rated for use in plenum

airspaces: meets UL 2043 for heat and smoke release, excluding the power supply;

meets UL 60950 for safety.

• The 5-pole port supports both hardware and software flow control.

The 3-pole ports support software flow control.

1 2 3

Specifications 1
Communications 3

Résumé du contenu

Page 1 - Specifications

Extron FOX T USW 103 Fiber Optic Transmitter with Integrated Switcher • Specifications 1SpecificationsFOX T USW 103NOTE: The FOX T USW 103 is not com

Page 2

Extron FOX T USW 103 Fiber Optic Transmitter with Integrated Switcher • Specifications 2 Video inputDigitalNumber/signal type ... 2 H

Page 3 - Communications

Extron FOX T USW 103 Fiber Optic Transmitter with Integrated Switcher • Specifications 3 CommunicationsSerial control portsControl ......

Plus de documents pour Commutateurs de réseau Extron electronics FOX T USW 103

Voir le document Extron electronics FOX T USW 103 Manuel d'utilisateur

Extron electronics FOX T USW 103 Manuel d'utilisateur (4 pages)

Commentaires sur ces manuels

Pas de commentaire

Extron electronics FOX T USW 103 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Commutateurs de réseau Extron electronics FOX T USW 103. Extron FOX T USW 103 specifications Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Commutateurs de réseau Extron electronics FOX T USW 103

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau Extron electronics FOX T USW 103