Extron-electronics GSS 100 User Guide Manuel d'utilisateur télécharger pdf (Page 12)

Reset Button

f Reset button — The Reset button initiates three levels of reset to the GSS. Press and

hold the button while the GSS is running or while you power up the GSS for different

reset levels.

 Events (mode 3) reset — Hold the Reset button for approximately 3 seconds (the

Reset LED blinks once), then release it and push it again for a moment to toggle

events monitoring on and off.

 IP settings (mode 4) reset — Hold the Reset button for approximately 6 seconds

(the Reset LED blinks twice), then release it and push it again for a moment to reset

the IP functions of the GSS.

 Absolute (mode 5) reset — Hold the Reset button for approximately 9 seconds

(the Reset LED blinks three times), then release it and push it again for a moment to

restore the GSS to the default factory conditions.

NOTE: The absolute (mode 5) reset clears all image ﬁles, IP settings, and user

settings and resets the graphic still store to the factory default.

GSS 100 Graphic Still Store • Installation 6

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Pas de commentaire

Extron-electronics GSS 100 User Guide Manuel d'utilisateur Page 12