Extron-electronics MP 101 Series User Guide Manuel d'utilisateur télécharger pdf (Page 16)

2-8

MP 101 Series • MP 101

MP 101, cont’d

Outside

Inside

Furniture mounting

In addition to using the MP 101 on a rack, you can mount it on

furniture using the optional MBU Mini Under-Desk Mount Kit

(part #70-212-01). To use this option, do the following:

1. Remove the rubber feet if they were previously installed.

2. Attach one of the mounting brackets to the MP 101, as

shown below.

a. Remove the two

machine screws from

one side of the unit.

Save these screws for

future use.

b. After lining up a

bracket with the holes,

attach the bracket using

the longer machine screws

provided.

c. Repeat step b to attach the other bracket.

3. Attach the MP 101 to the furniture.

a. Hold the unit against the underside of the table or

other furniture, and mark the locations for four screws

(two screws per bracket) on the mounting surface.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

Pas de commentaire

Extron-electronics MP 101 Series User Guide Manuel d'utilisateur Page 16