Extron-electronics CS 120P User Guide Manuel d'utilisateur télécharger pdf (Page 9)

Installation

This section provides instructions for installing the CS 26T speakers and the CS 120P

enclosure. Topics include:

• Installation Considerations

• Installation Configurations

• Installing the CS 1226T — Single Installer

• Installing the CS 120P in a Suspended Ceiling — Division of Labor

• Installing the CS 26T in a Suspended Ceiling — Division of Labor

• Installing CS 120P in a Hard Ceiling

Installation Considerations

WARNING: Risk of severe bodily injury from falling or sharp equipment.

Installation and service must be performed by authorized personnel only.

• All wiring and electrical connections must conform to all applicable building codes and

local ordinances.

• Installation in a plenum-rated environment requires plenum rated cable or conduit.

• If using secondary support cables, the installer provides the cables.

Installation Configurations

The CS 26T can be configured in the following ways:

• Open-back: For configurations in which the CS 120P is not used, use the C-ring

accessory, available at www.extron.com. The C-ring spreads out the clamping force of

the dog-legs when used in drop ceilings and gypsum ceilings.

• Using the CS 120P: When used with the CS 120P, the CS 26T can be placed in

plenum environments. This is the only configuration that is UL 2043 rated.

NOTE: The CS 120P can be ordered separately or as part of the CS 1226T kit.

For hard ceiling installations, see Installing the CS 120P in a Hard Ceiling on

page 26.

CS 26T and CS 120P User Guide • Installation 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

Pas de commentaire

Extron-electronics CS 120P User Guide Manuel d'utilisateur Page 9