Extron-electronics MTP Series User Guide Manuel d'utilisateur télécharger pdf (Page 14)

MTP Series • Installation 8

Rack Shelf

Quarter Rack Width

False Front Face Plate

(2) 4-40 x 3/16"

Screws

Eighth Rack Width

False Front Face Plate

Figure 8. Mounting the MTPs on a Rack Shelf

MDA SERIES

DISTRIBUTION AMPLIFIER

Figure 9. Mounting the MTPs on a

Standard Rack Shelf

Rack Mounting Instructions

On the standard rack shelf, the MTP mounts in one of eight locations to the rear of the rack

or in one of eight locations to the front of the rack.

1. Remove the feet from the bottom of the MTP, if installed.

2. Mount the MTP using two 4-40 x 3/16 inch screws in opposite (diagonal) corners to

secure the MTP to the shelf.

3. Install blank panels or other units to the rack shelf.

Furniture or Projector Mounting (All Except AAP Models)

Use the optional mounting kit (furniture, part number: 70-212-01, or projector, part

number: 70-217-01) to mount the MTP as follows:

1. Remove the feet from the bottom of the MTP, if installed.

2. Attach the mounting brackets to the MTP with the machine screws provided (see

figure 10).

• If furniture mounting, proceed to step 3.

• If projector mounting, proceed to step 4.

Under Desk Mounting

Projector Mounting

Ceiling

Projector

Mounting

Bracket

Mounting

Bolt

Figure 10. Desk and Projector Mounting the MTPs

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Pas de commentaire

Extron-electronics MTP Series User Guide Manuel d'utilisateur Page 14