Extron-electronics SME 100 Setup Guide Manuel d'utilisateur télécharger pdf

SME 100 • Setup Guide

The Extron SME 100 is a live streaming media encoder that interfaces with DVI, RGB, HDTV,

and standard denition signals for delivering media over IP networks. It features a three input video and audio switcher, plus

buffered loop-throughs for simplied integration into AV systems. The SME 100 uses H.264 / MPEG-4 AVC encoding to output an

IP stream over the Internet (or over an intranet) that can easily be decoded and viewed on PCs or H.264 compatible devices.

The SME100HD (part number 60-1061-01) supports both high denition and standard denition output rates. The SME100SD

(part number 60-1061-02) supports standard denition output rates only.

This guide provides basic instructions for an experienced installer to set up and operate the SME 100. Installation and service

must be performed by authorized personnel only.

NOTE: See the SME 100 User Guide for complete installation, configuration, operation, and mounting

information. The user guide is available at www.extron.com.

Rear Panel Overview

RS-232

RESET

Tx Rx

100-240VAC

50/60 Hz

0.5A MAX

R-Y

VID

B-Y/

RGB/R-Y,Y,B-Y/YC/VID

DVI-D

BUFFERED LOOP

INPUTS

AUDIO

LAN

ACT LINK

4 5

6 7 10

1211

AC power connector

DVI buffered loop connector

Component, S-video, composite BNC connectors (input 1)

Audio captive screw connectors (inputs 1 – 3)

Component, S-video, composite BNC buffered loop connectors

Buffered loop audio captive screw connectors

15-pin HD connector (input 2) with EDID emulation

RS-232 connector

15-pin HD buffered loop connector

Reset button and LED

DVI connector (input 3) with EDID emulation

RJ-45 Ethernet connector

Installation

Step 1 — Mount the SME 100

Turn all devices off and unplug their power cords. Verify that the SME 100 is disconnected from

the power source. Mount the SME 100 to a rack using the mounting brackets included with the

unit (see image at right).

Step 2 — Connect Input Devices

Connect input devices to at least one of the following connectors.

z Connect a video input device to the component, S-video, or composite BNC connectors

(input 1;

). See the examples below to connect the necessary signal format.

B-Y/

VID

R-Y

VID

B-Y/

VID

B-Y/

R-Y

S-video (YC) Component Video (Y, R-Y, B-Y)Composite Video

z Connect a video input device to the 15-pin HD connector (input 2;

). See pin congurations below.

Signal Pin 1 Pin 2 Pin 3 Pin 13 Pin 14 Signal Pin 1 Pin 2 Pin 3

RGBHV R G B H V YUV R-Y Y B-Y

RGBS R G B S S-video Y C

RGBcvS R G B S Video Vid

RGsB R Gs B

z Connect a high resolution digital input device to the DVI connector (input 3;

Rack Mount

Bracket

1 2 3 4

Résumé du contenu

Page 1 - Installation

1SME 100 • Setup Guide The Extron SME 100 is a live streaming media encoder that interfaces with DVI, RGB, HDTV, and standard denition signals for

Page 2 - Powering Up

2SME 100 • Setup Guide (Continued)EXTRON ELECTRONICS1sec.All input LEDs flashonce in sequence.1sec.2sec.Last active inputLED remains lit(here input 3

Page 3 - 9600 RS232

3Front Panel OverviewSME 100STREAMING MEDIA ENCODERADJUST1MENU NEXT23CONFIGab cd efa Config port — Connect a control PC to this port using a Mini-B

Page 4 - SMP-1.0.0.2-win32.exe

4SME 100 • Setup Guide (Continued)Extron Headquarters+1.800.633.9876 (Inside USA/Canada Only)Extron Asia+65.6383.4400Extron China+86.21.3760.1568)Ext

Commentaires sur ces manuels

Pas de commentaire

Extron-electronics SME 100 Setup Guide Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Extron-electronics SME 100 Setup Guide. Extron Electronics SME 100 Setup Guide User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Extron-electronics SME 100 Setup Guide