Extron-electronics TLP 1000TV User Guide Manuel d'utilisateur télécharger pdf (Page 12)

TLP 1000MV Rear Panel Features and Connections

klmn

Figure 5. TLP 1000MV Rear Panel Features

MTP signal adjustment controls — use a small screwdriver to adjust these three

MTP signal variables: S-video luminance gain (VID/Y), S-video chrominance gain (C),

and sharpness (S). For composite video signals, the gain is controlled by the VID/Y

adjustment.

MTP input — connect a twisted pair cable, terminated with an RJ-45 connector, to

provide video and audio input from an Extron MTP transmitter.

CAUTION: Connect the MTP transmitter to the MTP socket and the network

connector to the network socket. Although both use RJ-45

connectors, the MTP socket (on the left) must be connected to an

MTP transmitter and the network socket (on the right) must be

connected to a LAN. The wires on each connector use different

voltages and inputting the wrong voltages into a socket will damage

the TLP 1000MV.

TLP 1000MV and TLP 1000TV • Panel Features 6

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 53 54

Pas de commentaire

Extron-electronics TLP 1000TV User Guide Manuel d'utilisateur Page 12