Extron-electronics TPS150 User Guide Manuel d'utilisateur télécharger pdf (Page 19)

2-7TPS150 Switching and Transmission System • Installation

Video output connections

RGB/VGA video connector — Connect a VGA cable between this 15-pin HD

female connector and the VGA or RGB input on the display.

Composite video connector — Connect a video cable between this BNC

female connector and the composite video input on the display.

S-video connector — Connect an S-video cable between this 4-pin mini DIN

female connector and the S-video input on the display.

Component video connector — Connect a cable between these BNC female

connectors and the component video input on the display.

Serial connection

RS-232 connector — Connect a serial cable (figure 2-6) between this 9-pin D

connector and the RS-232 connector on the display for control of the display.

Power connection

AC power connector — Plug a standard IEC power cord into this connector

to connect the receiver to a 100 to 240VAC, 50 Hz to 60 Hz power source.

The receiver is protected by a 1.6 A, 250 V, time delay fuse. If replacement is

necessary, replace with the same amperage and voltage rating.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

Pas de commentaire

Extron-electronics TPS150 User Guide Manuel d'utilisateur Page 19