Extron electronics PVS 405D Guide d'installation télécharger pdf (Page 35)

Pull the cables through the receiver base.

1. Pull the cables to the receiver.

a. Pull the STP cable through the receiver

base, along with any other cables that will be

attached to the receiver (RS-232, STP cable

to a secondary receiver, and so on).

b. If mounting the receiver to a wall and using a

raceway, place the cables in the raceway and

replace the raceway cover.

2. Connect the cables to the receiver.

a. Connect the STP cable to the Receiver Out

port (the RJ-45 connector closest to the DIP

switches on the receiver base).

Place the cables in the raceway and replace

the raceway cover.

Connect the STP cable to the Receiver Out

RJ-45 port.

Procedure

VoiceLift System with PVS 405D Installation Guide • Installation — Stage 4 29

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 45 46

Pas de commentaire

Extron electronics PVS 405D Guide d'installation Page 35