Extron electronics Architectural Series Universal Interfaces with Audio and ADSP RGB 560/Dual Manuel d'utilisateur télécharger pdf (Page 18)

RGB 500 Series • Rough-in Templates

Rough-in Templates, cont’d

B-3

RGB 500 Dual, RGB 508, RGB 560 Dual and RGB 568

Rough-in Template

Use this template as a guide for cutting the hole in the installation surface (wall or

furniture) for the interfaces with a 4-gang size faceplate. This diagram is actual

size.

This light gray area represents where the

interface enclosure (2.50” H x 3.70” W) will be

located against the rear of the RGB 500 Dual,

RGB 508, RGB 560 Dual or RGB 568 front panel.

The dashed line indicates the recommended

cut-out area (3.875” H x 7.525” W)

for the installation surface.

This light gray area represents where the

second interface enclosure (2.50” H x 3.70” W)

will be located against the rear of the

RGB 500 Dual or RGB 560 Dual front panel.

The solid, outer line (4.50” H x8.325” W)

represents the outside edge

of the wall mounting bracket.

Rough-in Templates

RGB 500 and RGB 560 Rough-in Template

Use this template as a guide for cutting the hole in the

installation surface (wall or furniture). This diagram is for the

interfaces with 2-gang size faceplates. It is shown at actual size.

The dotted line indicates the recommended

cut-out area (3.875” H x 3.80” W)

for the installation surface.

The solid, outer line (4.50” H x 4.60” W)

represents the outside edge

of the wall mounting bracket.

Template for the 2-gang

mounting bracket

B-2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Pas de commentaire

Extron electronics Architectural Series Universal Interfaces with Audio and ADSP RGB 560/Dual Manuel d'utilisateur Page 18