Extron electronics MTPX 3232 Guide d'installation télécharger pdf (Page 23)

Refer also to the MTPX User’s Manual at www.extron.com.

Optimizing the video

Most MTP transmitters and half of the MTPX TP outpust have a

pre-peaking feature. Many MTP receivers have level/peaking

and skew adjustments. Set these features as follows for the best

image quality:

1. For inputs from MTP T 15HD products only — If the

cable between the MTP transmitter and the MTPX Plus

is > 300', turn the transmitter’s Pre-Peak switch on. For

shorter cables, turn the switch off.

2. For outputs — If the cable between the MTPX and the

receiver is > 300', turn the MTPX’s Pre-Peak feature on.

For shorter cables, turn the feature off. Set the feature as

follows:

a. In the Matrix Switchers Control Program, click Tools >

MTPX Config settings and then check or uncheck the

appropriate Pre-Peaking box.

MTPX Pre-Peak is available on the ﬁrst half of the MTPX

Plus outputs (for example outputs 1 through 4 for an

MTPX Plus 168.

Unless the TP cable lengths are changed, these settings

should need to be made only once, during installation.

3. If level/peaking and skew adjustments are available on

the connected receiver(s), set them in accordance with the

applicable MTP product manual.

MTPX • Remote Control and Optimizing the Video

Remote Control and Optimizing the Video, cont’d

4-12

MTPX • Remote Control and Optimizing the Video

4-13

1 2 ... 18 19 20 21 22 23

Pas de commentaire

Extron electronics MTPX 3232 Guide d'installation Page 23