Extron-electronics AVT 200HD User Guide Manuel d'utilisateur

User GuideAVT 200HDTunersATSC and Cable TV HD Tuner68-1834-01 Rev. A05 11

AVT 200HD Tuner • Installation 4InstallationThis section describes the rear panel of the AVT 200HD and provides instructions for cabling. It covers th

AVT 200HD Tuner • HTML Configuration and Control 94The Maximum Allowed TV Rating for Ages section contains four submenus from which you can select blo

AVT 200HD Tuner • HTML Operation 95AVT 200HD Tuner • Reference Information 95Reference InformationThis section provides reference information on the A

AVT 200HD Tuner • Reference Information 9696Scaled resolution ... 480i1, 480p1, 720p2, 1080i2 1 = at 59.94 Hz, 2 = at 60 Hz

AVT 200HD Tuner • Reference Information 9797IR remote control ... AVT 200HD remote (optional) Front panel: 30' maximum,

AVT 200HD Tuner • Reference Information 9898Part Numbers and AccessoriesIncluded PartsThe following parts are provided with your AVT 200HD.Included Pa

AVT 200HD Tuner • Reference Information 9999Mounting the TunerUL Guidelines for Rack MountingThe following Underwriters Laboratories (UL) guidelines p

AVT 200HD Tuner • Reference Information 100100IP AddressingWhat is an IP Address?An IP address is a 32-bit binary number that is used to identify each

AVT 200HD Tuner • Reference Information 101101The following is an example of an invalid Class C addressing scheme:Device IP AddressAVT 200HD Control S

AVT 200HD Tuner • Reference Information 102102The line Pinging ... reports the actual numeric IP address, regardless of whether you entered the actual

AVT 200HD Tuner • Reference Information 103103Telnet tipsIt is not the intention of this guide to detail all of the operations and functionality of Te

AVT 200HD Tuner • Installation 5Rear Panel FeaturesAll of the AVT 200HD connectors are on the rear panel. The following figure shows the AVT rear pane

AVT 200HD Tuner • Reference Information 104104Setting carriage return-line feedUnless commanded otherwise, Telnet transmits a line feed character only

AVT 200HD Tuner • Reference Information 105105Subnet masks and octetsThe subnet mask (figure 66) is used to determine whether the local and remote dev

AVT 200HD Tuner • Reference Information 106106Frequency TablesThe following tables list all the ATSC (over-the-air) and cable channels that are availa

AVT 200HD Tuner • Reference Information 107107Physical ChannelLower EdgeVideo CarrierATSC CarrierAudio CarrierUpper Edge36 602 603.25 602.31 607.75 60

AVT 200HD Tuner • Reference Information 108108Cable Frequency TablePhysical ChannelVisual Carrier Frequency (MHz)Standard Cable IRC Cable HRC Cable2 5

AVT 200HD Tuner • Reference Information 109109Physical ChannelVisual Carrier Frequency (MHz)Standard Cable IRC Cable HRC Cable40 319.25 319.25 31841 3

AVT 200HD Tuner • Reference Information 110110Cable Frequency Table (continued)Physical ChannelVisual Carrier Frequency (MHz)Standard Cable IRC Cable

AVT 200HD Tuner • Reference Information 111111Cable Frequency Table (continued)Physical ChannelVisual Carrier Frequency (MHz)Standard Cable IRC Cable

Extron USA - WestHeadquarters+800.633.9876Inside USA/Canada Only+1.714.491.1500+1.714.491.1517 FAXExtron USA - East+800.633.9876Inside USA/Canada Only

AVT 200HD Tuner • Installation 6e HDMI video output connector — Connect an HDMI output device to this female HDMI connector for digital video output.

AVT 200HD Tuner • Installation 7Balanced Audio OutputUnbalanced Audio OutputTipRingTipRingLRSleeve(s)Do not tin the wires!TipNO Ground HereSleeve(s)NO

AVT 200HD Tuner • Installation 8Control ConnectionsEthernet ConnectionWhen you connect a computer to the AVT 200HD LAN port, it is vital that you use

AVT 200HD Tuner • Installation 92. Plug the wired 5-pole connector into the RS-232/IR receptacle on the AVT 200HD rear panel.RS-232/IRComputer orCont

AVT 200HD Tuner • Installation 10The following diagram shows how to wire the AVT 200HD to use the infrared remote control with the optional IR Link.Mo

AVT 200HD Tuner • Installation 112. If this is the first time you have connected an AVT 200HD to this USB port on your computer, the Found New Hardwa

AVT 200HD Tuner • Installation 123. Click Next. On the next screen, make sure that the Install the software automatically (Recommended) radio button

AVT 200HD Tuner • Operation 13OperationThis section describes the AVT 200HD front panel controls and the procedures for using them to configure and op

iiThis symbol is intended to alert the user of important operating and mainte-nance (servicing) instructions in the literature provided with the equip

AVT 200HD Tuner • Operation 14e Up (>) and Down (<) buttons — These buttons change the channel or preset, depending on the selected operating m

AVT 200HD Tuner • Operation 15Powering OnApply power by connecting the provided IEC power cord to the rear panel IEC connector and to an AC source. Th

AVT 200HD Tuner • Operation 16Menus on the LCD ScreenThe AVT 200HD menus that are displayed on the LCD screen enable you to configure and operate the

AVT 200HD Tuner • Operation 17Menu flow diagramThe following diagram shows the menus that are displayed in the front panel LCD window and the order in

AVT 200HD Tuner • Operation 18Channel Setup MenuThe Channel Setup menu lets you select the radio frequency source (over-the-air or cable) and to scan

AVT 200HD Tuner • Operation 19Follow these steps to scan for channels from the front panel. The AVT must be in tune mode. If the desired signal source

AVT 200HD Tuner • Operation 20• If no channels are found, the LCD screen displays [RF source] CHANNEL LIST Empty, alternating with PRESS UP BUTTON to

AVT 200HD Tuner • Operation 21Output Configuration MenuFrom this menu, you can set output parameters, including resolution and refresh rate, display a

AVT 200HD Tuner • Operation 22• Preset mode: In preset mode, the Up and Down buttons step up or down through presets that have been saved. NOTE: Usi

AVT 200HD Tuner • Operation 23Recalling presetsWhen a channel is saved as a preset, you can tune to that channel by selecting its preset. Using the fr

iiiFCC Class A NoticeThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC R

AVT 200HD Tuner • Operation 24ResolutionSimultaneous Video OutputComposite S-video Component RGBHVHDMI (with embedded audio)480i @ 59.94 Hz X X X X480

AVT 200HD Tuner • Operation 25Figure 21. Display Modes for 4x3 and 16x9 MonitorsSelecting the closed caption serviceThe Caption submenu lets you enab

AVT 200HD Tuner • Operation 26The following functions are available via the Audio Configuration submenus:• Selecting the digital audio type (Digital

AVT 200HD Tuner • Operation 27Viewing serial port and IP settingsThe View Comm Setting menu appears after the Audio Configuration menu as you press th

AVT 200HD Tuner • Operation 28Unit Reset Menu (Resetting from the Front Panel)Three modes of reset can be initiated from the AVT 200HD front panel. Ne

AVT 200HD Tuner • Operation 29Exiting the Menu SystemTo exit the menu system and return to the default cycle, do either of the following:• Press the

AVT 200HD Tuner • Operation 30 Reset Modes SummaryMode Activation Result Purpose/Notes1 Hold in the Reset button while applying power to

AVT 200HD Tuner • Operation 31Locking and Unlocking the Front Panel (Executive Modes)To prevent access by unauthorized users or accidental changes to

AVT 200HD Tuner • Operation 32You can access the Exec Mode Select menu when any other menu or submenu is displayed. To select an executive mode:1. Pr

AVT 200HD Tuner • Operation 33IRSDTVEDTVHDTVCONFIGCHANNELAVT 200HD40 40 30’ (9.1 m)maximumAVT 200HD Remote ControlAVT 200HD RemoteCHANNEL SELECTIONVID

ivConventions Used in this GuideIn this user guide, the following are used:NOTE: A note draws attention to important information.TIP: A tip provides

AVT 200HD Tuner • Operation 34Buttons on the AVT 200HD Remote ControlThe following functions are available through the buttons on the AVT 200HD IR Rem

AVT 200HD Tuner • Operation 35i Guide — Toggles the on-screen Program Guide (list of programs currently available on the selected channel) on and off

AVT 200HD Tuner • Operation 362. Press the Enter button to implement the channel or preset selection. • If the number you entered is a valid channel

AVT 200HD Tuner • Operation 37In the example on below, the current channel is 4.1 (on the OSD, the decimal point is shown as a hyphen); the channel na

AVT 200HD Tuner • Operation 38Program GuideThe translucent program guide display provides a list of the programs available on the current channel for

AVT 200HD Tuner • Remote Configuration and Control 39Remote Configuration and ControlThis section describes the serial, Ethernet, and USB connections

AVT 200HD Tuner • Remote Configuration and Control 40IP AddressTo access the AVT 200HD via the Ethernet port, obtain the IP address of the tuner from

AVT 200HD Tuner • Remote Configuration and Control 41Using SIS CommandsSIS commands consist of one or more characters per command field. They do not r

AVT 200HD Tuner • Remote Configuration and Control 42Tuner Error ResponsesIf the AVT is unable to perform an SIS command that it receives because the

AVT 200HD Tuner • Remote Configuration and Control 43Special CharactersThe following characters are invalid preset names, the tuner name, passwords, o

ContentsIntroduction... 1About this Guide ... 1A

AVT 200HD Tuner • Remote Configuration and Control 44X1& = Closed caption foreground 0 = white 4 = blue and background color 1 = black 5 = y

AVT 200HD Tuner • Remote Configuration and Control 45Command/Response Table for AVT 200HD SIS CommandsCommandASCII Command(Host to Tuner) Response(Tun

AVT 200HD Tuner • Remote Configuration and Control 46CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionRF Input and Cha

AVT 200HD Tuner • Remote Configuration and Control 47CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionRF Input and Cha

AVT 200HD Tuner • Remote Configuration and Control 48CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionVideo Output (co

AVT 200HD Tuner • Remote Configuration and Control 49CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionVideo Output (co

AVT 200HD Tuner • Remote Configuration and Control 50CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionVideo Output (co

AVT 200HD Tuner • Remote Configuration and Control 51CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionAudio Output (co

AVT 200HD Tuner • Remote Configuration and Control 52CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionV-chip Setup (co

AVT 200HD Tuner • Remote Configuration and Control 53CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionV-chip Setup (co

HTML Configuration and Control ... 74Accessing the Web Pages ...

AVT 200HD Tuner • Remote Configuration and Control 54CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionOther Settings (

AVT 200HD Tuner • Remote Configuration and Control 55CommandASCII Command(Host to Tuner) Response(Tuner to Host)Additional DescriptionResetsClear chan

AVT 200HD Tuner • Remote Configuration and Control 56Symbol Definitions for IP-specific CommandsX4! = Port number 01–99 (represented as two ASCII c

AVT 200HD Tuner • Remote Configuration and Control 57X6) = Subnet mask nnn.nnn.nnn.nnn (Leading zeros in each of the four fields are optional

AVT 200HD Tuner • Remote Configuration and Control 58X7& = Event data size b = bit B = byte (8 bits) S = short (16 bits) L = long (32 bit

AVT 200HD Tuner • Remote Configuration and Control 59Command/Response Table for IP-Specific SIS CommandsCommandASCII Command(Host to Tuner)Response(Tu

AVT 200HD Tuner • Remote Configuration and Control 60CommandASCII Command(Host to Tuner)Response(Tuner to Host)Additional DescriptionIP Setup Commands

AVT 200HD Tuner • Remote Configuration and Control 61CommandASCII Command(Host to Tuner)Response(Tuner to Host)Additional DescriptionIP Setup Commands

AVT 200HD Tuner • Remote Configuration and Control 62CommandASCII Command(Host to Tuner)Response(Tuner to Host)Additional DescriptionIP Setup Commands

AVT 200HD Tuner • Remote Configuration and Control 63CommandASCII Command(Host to Tuner)Response(Tuner to Host)Additional DescriptionRemap Port Destin

AVT 200HD Tuner • Introduction 1IntroductionThis section gives an overview of the Extron AVT 200HD ATSC and Cable TV HD Tuner and describes its signif

AVT 200HD Tuner • Remote Configuration and Control 64CommandASCII Command(Host to Tuner)Response(Tuner to Host)Additional DescriptionStream files via T

AVT 200HD Tuner • Remote Configuration and Control 65CommandASCII Command(Host to Tuner)Response(Tuner to Host)Additional DescriptionEvent control (c

AVT 200HD Tuner • Remote Configuration and Control 66Accessing the AVT 200HD Configuration & Control SoftwareThe Windows-based AVT 200HD Configura

AVT 200HD Tuner • Remote Configuration and Control 673. On the Control Software screen, click A on one of the linked alphabets at the top and bottom

AVT 200HD Tuner • Remote Configuration and Control 68Starting the SoftwareTo run the AVT 200HD Configuration & Control Program:1. Click on the AV

AVT 200HD Tuner • Remote Configuration and Control 69• RS232 (shown below): From the drop-down menus, select the port, baud rate (the default is 9600

AVT 200HD Tuner • Remote Configuration and Control 70Figure 41. AVT 200HD Configuration & Control Program Main Window with the Control Tab Displa

AVT 200HD Tuner • Remote Configuration and Control 71Using the Configuration & Control Program Help FileFor instructions on using the AVT 200HD Co

AVT 200HD Tuner • Remote Configuration and Control 725. Double-click on <double click to set> in the New Firmware File column, or select New Fi

AVT 200HD Tuner • Remote Configuration and Control 737. In the Firmware Loader window, click Begin. The following indicators on the Firmware Loader w

AVT 200HD Tuner • Introduction 2• Preset channel selection — Frequently tuned channels can be saved and recalled as presets. There are 99 presets ava

AVT 200HD Tuner • HTML Configuration and Control 74HTML Configuration and ControlThis section provides procedures for accessing and using the AVT emb

AVT 200HD Tuner • HTML Configuration and Control 754. Press the <Enter> key. The tuner checks to see if it is password protected.• If the tune

AVT 200HD Tuner • HTML Configuration and Control 76System Status PageThe System Status page provides an overall view of the status of the tuner, inclu

AVT 200HD Tuner • HTML Configuration and Control 77Configuration PagesThe Configuration tab contains enables you to four pages that only an administra

AVT 200HD Tuner • HTML Configuration and Control 78IP Settings FieldsThe IP Settings fields provide a location for viewing and editing settings unique

AVT 200HD Tuner • HTML Configuration and Control 79Date/Time Settings FieldsThe fields in the Date/Time Settings section let you view and set date and

AVT 200HD Tuner • HTML Configuration and Control 80Tuner Settings PageOn the Tuner Settings page, you can show or hide scanned channels, select the si

AVT 200HD Tuner • HTML Configuration and Control 81Channel Scan sectionIn this section you can select the signal source (ATSC or cable) and initiate s

AVT 200HD Tuner • HTML Configuration and Control 82Editing or deleting a presetTo edit a preset:1. In the Presets section, select a preset to edit.2.

AVT 200HD Tuner • HTML Configuration and Control 83Passwords PageAccess the Passwords page by clicking the Passwords link on the sidebar menu on the S

AVT 200HD Tuner • Introduction 3Application DiagramVIDRH V B-Y YG B R-YCOAXHDMIOPTICALAIR/CABLE50/60 HzLANRESETYC100-240V 0.8AOUTPUTAUDIOOUTDIGIT

AVT 200HD Tuner • HTML Configuration and Control 84Firmware Upgrade PageThe Firmware Upgrade page lets you replace the firmware that is coded on the A

AVT 200HD Tuner • HTML Configuration and Control 855. Click the Browse button. A Choose File to Upload window opens.Figure 54. Choose File Window wi

AVT 200HD Tuner • HTML Configuration and Control 86File Management PageThe File Management page is a useful tool that allows you to use and upload exi

AVT 200HD Tuner • HTML Configuration and Control 87Adding a DirectoryTo add a directory or folder to the AVT file system:1. Enter the directory name

AVT 200HD Tuner • HTML Configuration and Control 88Control PagesFrom the Control tab, you can access the pages that allow you to set some special feat

AVT 200HD Tuner • HTML Configuration and Control 89Selecting a channelTo tune to a channel using the User Control page:1. Make sure that the AVT is i

AVT 200HD Tuner • HTML Configuration and Control 90Enabling or disabling audio or video muting, image freeze, closed captioning, and the Program Guide

AVT 200HD Tuner • HTML Configuration and Control 91• Format the Appearance — To specify the text and background parameters for the closed caption, ma

AVT 200HD Tuner • HTML Configuration and Control 92Figure 59. V-chip Screen 4. On the V-Chip screen, make adjustments as desired in the sections des

AVT 200HD Tuner • HTML Configuration and Control 93TV Rating Parental Control sectionIn this section, you can specify the highest rating level of tele