Extron-electronics Cable Retraction System User Guide Manuel d'utilisateur télécharger pdf (Page 23)

Cable Retraction System • Installation 17

Locking Screw (Optional)

If the retraction system is mounted next to an unused location in the Cable Cubby

enclosure, a locking screw is provided to prevent the retractors from rotating on their

mounting bolt during operation.

If needed, tighten the locking screws to prevent movement of the retractor. There is one

locking screw for each retractor.

NOTE: Do not overtighten. The locking screw only needs to be snug.

Tighten locking

scre

w (1 each).

Locking

Screw

Figure 18. Locking Screws

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Pas de commentaire

Extron-electronics Cable Retraction System User Guide Manuel d'utilisateur Page 23