Extron-electronics PoleVault Digital Switcher Systems PVS 405D Manuel d'utilisateur télécharger pdf (Page 36)

2. Pull the Cables (at the input locations)

The following cables need to be installed:

• STP cables for signal transmission from the

AV wallplates to the PVS 405D

NOTES:

• Maximum distance from the

PVS 405D to the Wallplate is 150 feet.

• STP cables supplied are terminated to

the TIA 568B standard.

• PoleVault switcher communication cable

from the MediaLink controller (MLC PW/

RS-232/VC, 50 feet, part number

26-626-50)

• Projector communication cables from the

MediaLink controller (IR Serial Comm,

50 feet, part number 26-621-50)

a. Drill cable pathways through any obstructions

(for example, wall caps, fire-breaks, or

horizontal studs).

b. Label the signal cables at both ends with the

supplied labels.

c. Pull the cabling through the wall from the ceiling

space down to the location of the transmitters

and other wall devices, and out through the

openings.

TIP: Secure cables with cable clamps to

provide strain relief.

INPUT 1/2

NOTE:

Fasten the WHITE section to the cable

first, then wrap the clear section around it.

Use the supplied labels for clear cable

identiﬁcation during installation.

Pull the cables at each location.

PoleVault Digital Systems • Installation — Stage 2 (Wallplates and MLC)30

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

Pas de commentaire

Extron-electronics PoleVault Digital Switcher Systems PVS 405D Manuel d'utilisateur Page 36