Extron-electronics RJ-11 Installation Manuel d'utilisateur télécharger pdf (Page 13)

RJ-45 to RJ-11 Conversion Kit • HSA 800, 802, 822 Installation

HSA 800, 802, 822 Installation, cont’d

Routing the AAP Cables

1. Open the top panel to extend the AAP cables to their

maximum pull.

2. Experiment with AAP cable positioning to ensure that the

cables do not rub against the edges of the AAP cable hole

and to ensure that the cable pull does not restrict the

movement of the top panel. Figure 2-6 shows the cables

routed to the side, which proved effective in tests at

Extron.

Figure 2-6 shows an HSA 822. For the purposes of this

procedure, the HSA 800 and HSA 802 are physically

similar.

Secure the AAP cables at the circled locations.

View from one side View from the opposite side

Figure 2-6 — HSA 822 AAP cable routing

3. Use tie wraps to secure the AAP cables to the tie-down

holes in the clamshell and enclosure.

2-8

1 2 ... 8 9 10 11 12 13

Pas de commentaire

Extron-electronics RJ-11 Installation Manuel d'utilisateur Page 13