Extron-electronics TLP 710CV User Guide Manuel d'utilisateur télécharger pdf (Page 19)

Figure 7. TLP 710CV Front Panel with Bezel Removed

Light Sensor — mounted on top of the screen. The sensor monitors the level of ambient

light and adjusts the screen brightness.

b LCD screen — has a 800x480 resolution with a touch overlay. Extron software is used to

design and conﬁgure a graphic user interface to display buttons, text, or icons, which have

user-deﬁned functions associated with them.

Three MTP Signal Adjustments — available for S-video luminance gain (VID/Y), S-video

chrominance gain (C), and sharpness (S). For composite video signals, the gain is controlled

by the VID/Y adjustment.

Reset LED — provides feedback about the reset status when the user presses the reset

button (see “Reset Modes” on page 43).

Controller Communication LED — unlit during normal operation. Blinks red if the

connection to the IP Link controller is lost.

Reset Button — allows the unit to be reset in

any of four different modes (see “Reset Modes”

on page 43).

Menu Button — activates the on-screen menus

for calibrating the unit (see “Initial Calibration”

on page 18).

Loudspeaker — provides audible feedback (see

the ﬁgure to the right).

i Slots — insert Extron removal tool to separate the

bezel from the screen.

j Illumination LED — lights the interior of the

cable cubby compartment.

TLP 710CV • Touchpanel Features and Connectors 13

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

Pas de commentaire

Extron-electronics TLP 710CV User Guide Manuel d'utilisateur Page 19