Extron electronics IPL T S2 Instructions d'exploitation télécharger pdf (Page 19)

2-7

IPL T S Series • Installation and Operation

2-7

Ethernet/LAN

LAN Activity LED — A blinking yellow LED indicates LAN activity.

LAN connector — An RJ-45 connector for a network connection. Use an

Ethernet straight-through cable to connect to a switch, hub, or router, or an

Ethernet crossover cable to connect directly to a PC.

COM1

LAN

00-05-A6-00-00-02

POWER

12V

.5A MAX

COM1

TX RX TX RX

COM2

32 4

12 3 4 5 67 8

RJ-45 Connector

Insert

Twisted

Pair Wires

Pins:

Side View

Straight-through Cable

(for connection to a switch, hub, or router)

End 1 End 2

Pin Wire Color Pin Wire Color

1 white-orange 1 white-orange

2 orange 2 orange

3 white-green 3 white-green

4 blue 4 blue

5 white-blue 5 white-blue

6 green 6 green

7 white-brown 7 white-brown

8 brown 8 brown

Crossover Cable

(for direct connection to a PC)

End 1 End 2

Pin Wire Color Pin Wire Color

1 white-orange 1 white-green

2 orange 2 green

3 white-green 3 white-orange

4 blue 4 blue

5 white-blue 5 white-blue

6 green 6 orange

7 white-brown 7 white-brown

8 brown 8 brown

Figure 2-9 — RJ-45 connector wiring

Link LED — A lit green LED indicates a good LAN connection.

Serial Communication

Captive screw connector — Plug a 3.5 mm, 5-pole captive screw connector

into this socket for serial ports 1 and 2 (IPL T S2) or serial ports 3 through 6

(IPL T S6) connections. Pacing and handshaking are not supported via the

captive screw connectors.

The two IPL T S2 captive screw connectors are in parallel with the two 9-pin D

connectors. For each serial port on the S2 use either the captive screw connector

or the 9-pin D connector, but not both.

COM1 — 9-pin D connector for serial port 1

COM2 — 9-pin D connector for serial port 2

COM3 — 9-pin D connector for serial port 3 (S4 only)

COM4 — 9-pin D connector for serial port 4 (S4 only)

IPL T S Series interface devices can be used to control display devices, switchers,

and other A/V equipment via an RS-232/RS-422/RS-485 connection.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 78 79

Commentaires sur ces manuels

Pas de commentaire

Extron electronics IPL T S2 Instructions d'exploitation Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Extron electronics IPL T S2