Extron-electronics MLA VC10 Plus User Guide Manuel d'utilisateur télécharger pdf (Page 41)

Command ASCII Command

(host to unit)

Response

(unit to host)

Additional Description

Voltage and Potentiometer Adjustment

Set the maximum voltage

output level

EV*X$VLCM} Vlcm•VX$]

VolX!]

Set the maximum voltage output level.

(X$ = 0.04 to 10.00 V; default is 10 V.)

The volume status (X!) is reported even

if there is no change in volume.

NOTE: The device control mode must be set to voltage before this command can be used.

View

maximum voltage

output level

EVVLCM} Vlcm•VX$] X$ is returned in four digits with no

decimal point.

Set the potentiometer

maximum resistance

output

EP*X$VLCM} Vlcm•PX$]

VolX!]

Sets the maximum resistance output

on the wiper ( ) pin. (X$ = 0.00 to

10.00 kilohm; default is 10 kilohm.)

The volume status (X!) is reported even

if there is no change in volume.

NOTE: The device control mode must be set to potentiometer before this command can be used.

View

the potentiometer

maximum resistance

output

EPVLCM} Vlcm•PX$] X$ is returned in four digits without a

decimal.

Modes

Set control mode

EM*X%VLCM} Vlcm•MX%•]

VolX!]

Control mode status (X%)

0 = potentiometer (default)

1 = voltage

View control mode

EMVLCM} Vlcm•MX%•]

Set inverse mode

EI*X@VLCM} Vlcm•IX@•]

VolX!]

Inverse mode status (X@)

0 = Off (default)

1 = On

View inverse mode

EIVLCM} Vlcm•IX@•]

If Inverse mode is off, returns 0;

if Inverse mode is on, returns 1.

Set soft start mode

ES*X@VLCM} Vlcm•SX@•] Soft start mode status (X@)

0 = Off

1 = On (default)

View soft start mode

ESVLCM} Vlcm•SX@•]

Set soft start delay

ED*X(VLCM} Vlcm•DX(] Soft start delay — X( ms per volume

step 40 ms (default) to 200ms

View soft start delay

EDVLCM} Vlcm•DX(]

Set auto mute mode

EA*X@VLCM} Vlcm•AX@•] Auto mute mode status (X@)

0 = Off

1 = On (default)

View auto mute mode

EAVLCM} Vlcm•AX@•]

Set volume taper mode

EL*X^VLCM} Vlcm•LX^•]

VolX!]

Volume taper mode status (X^)

0 = Linear

1 = Logarithmic

View volume taper mode

ELVLCM} Vlcm•LX^•]

MLA VC10 Plus • SIS Commands 35

1 2 ... 36 37 38 39 40 41 42 43 44 45

Commentaires sur ces manuels

Pas de commentaire

Extron-electronics MLA VC10 Plus User Guide Manuel d'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Extron-electronics MLA VC10 Plus User Guide