Extron-electronics MLA VC10 Plus User Guide Manuel d'utilisateur télécharger pdf (Page 9)

Panels and

Connections

This section describes the features and connectors for the MLA VC10 Plus:

z Front Panel Connections and Features

z Rear Panel Connections

Front Panel Connections and Features

CONFIG

RELAY

MUTE

MLA VC10 Plus

Figure 2. MLA VC10 Plus Front Panel

a Power and Activity LED —

z Is off when the unit is not receiving power

z Lights solid green when the unit is receiving power

z Continuously ﬂashes green while SIS commands are received.

b Audio Mute LED — lights solid green when volume level is at 0 or is muted.

c Relay LED —

z Lights solid green when the relay is triggered or toggled on.

z Pulses when the relay is momentarily triggered

d Conﬁg port — A USB cable can be connected to this mini B USB female port when

using a PC to connect to the MLA VC10 Plus.

NOTE: During configuration, the host PC provides power through the USB cable.

This is sufficient to power the unit during configuration only. For normal

use, the unit must receive power from a 12 VDC power supply.

e Reset Button — used to reset to the factory-installed ﬁrmware (see page 19).

MLA VC10 Plus • Panels and Connections 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 44 45

Pas de commentaire

Extron-electronics MLA VC10 Plus User Guide Manuel d'utilisateur Page 9