Extron-electronics FOX Matrix 7200 Manuel d'utilisateur télécharger pdf (Page 88)

The radio buttons and check boxes associated with each address field permit the

administrator to specify specific e‑mail requirements for each recipient.

Edit these fields and controls as follows:

1. Click in the desired

E-mail

Addressee

field. The graphic cursor becomes a text cursor.

2. Edit the e‑mail address as desired. Standard e‑mail address conventions

(for example: nnnnn@xxx.com) apply.

3. Press the <Tab> key on the keyboard or click in another field to exit the

E-mail

Addressee

field.

4. In the square associated with each addressee, select one or more options about which

the addressee is to be e‑mailed: missing input(s), fans, and power supply. In the floating

box that contains the input numbers, select the inputs to be monitored.

5. In the round radio buttons associated with each addressee, select whether the

addressee is to be e‑mailed of failures, fixes, both, or not to be notified.

The

None

radio button is useful for temporarily removing personnel from the e‑mail list

when they are unavailable, such as when travelling or on vacation.

6. If desired, click the

Send

test

E-mail

button to test the e‑mail function.

7. Click the

Take

button to make the e‑mail address changes take affect.

Updating the Firmware

The firmware upgrade utility provides a way to replace the firmware that is coded on the

control board of the switcher without taking the switcher out of service.

NOTE: Upgrading the firmware does not overwrite the current configuration or

presets.

Update the switcher firmware as follows:

1. Perform steps 1 through 5 of Installing the Software, on page 72, to download the

firmware upgrade from the Extron website.

2. Click Run in the File Download and Security Warning dialog boxes (see figure 38 on

the next page). The PC extracts the firmware update received from the Extron website

and starts the Extron Installation Program to extract the firmware file.

3. Click

in the Firmware Upgrade window. The program extracts the firmware files

and places them in a folder identified in the InstallShield Wizard window.

ATTENTION: The ﬁrmware ﬁle must have an .s19 extension. Other ﬁle types can

cause the switcher to stop functioning.

NOTES:

• Note the folder to which the firmware file is saved. When downloaded

from the Extron website, the ﬁrmware is placed in a subfolder of:

• Windows 7 or Windows 8: C:\Program Files (x86)\Extron\Firmware

• Older versions: C:\Program Files\Extron\Firmware

• The original factory‑installed ﬁrmware is permanently available on the matrix

switcher. If the attempted ﬁrmware upload fails, the switcher reverts to the

factory‑installed ﬁrmware.

4. Click

Finish

to exit the program.

FOX Matrix 3200 and 7200 Switchers • Matrix Software 80

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 131 132

Commentaires sur ces manuels

Pas de commentaire

Extron-electronics FOX Matrix 7200 Manuel d'utilisateur Page 88

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Extron-electronics FOX Matrix 7200