Extron-electronics SME 100 User Guide Manuel d'utilisateur Page 106
- Page / 185
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
c Page Timeout panel
This panel is used to automatically close (log out) the connection between the viewer
and the SME100 after a specified amount of idle time has passed. This feature helps
manage available bandwidth, especially when a large amount of users are accessing
the SME100 to view streams. A setting of 0 hours and 0 minutes means the timeout
feature on the Live View page is disabled.
NOTE: If both the Hours and Mins drop-down menus are specified, the specified
hours and minutes of idle time must pass before the SME100 closes
(logs out) the connection. For example, if the Hours drop-down menu is set to 2
and the Mins drop-down menu is set to 15, the SME100 will wait for 2 hours and
15 minutes of idle time to pass before closing (logging out) the connection to the
stream.
• Hours — Use this drop-down menu to set the number of inactive hours that must
pass before the SME100 closes (logs out) the connection to the stream. The range
of settings is 0 to 23.
• Mins — Use this drop-down menu to set the number of inactive minutes that must
pass before the SME100 closes (logs out) the connection to the stream. The range
of settings is 0 to 55, in increments of 5.
When the connection between the viewer and the SME100 is about to be closed
(logged out) a notification message appears at the bottom of the web page (figure 75).
Figure 75. Timeout Notification
d Streaming Methods
This drop-down menu selects from the available unicast RTP pull streaming methods
(see "Protocols Used for Streaming" on page 20) to assist with network compatibility
where ports may be closed or blocked due to firewall settings:
• Auto – Selects the best streaming method (starting with RTP, then RTP/RTSP, then
RTP/RTSP/HTTP) that will be used with the firewall configuration.
NOTE: If you are uncertain about your firewall settings, select this setting.
• RTP (default) – Uses RTP over UDP to send stream packets to the requested
location.
• RTP/RTSP – Interleaved RTSP; sends stream packets over RTSP using TCP.
• RTP/RTSP/HTTP – HTTP tunneling; sends stream packets over HTTP using TCP.
SME100 • Web-based Configuration Page 100
- User Guide 1
- Safety Instructions 2
- FCC Class A Notice 3
- Specifications Availability 4
- Contents 5
- SME 100 • Contents vi 6
- Introduction 7
- SME100 • Introduction 2 8
- Suggested PC Requirements 9
- Features 10
- SME100 • Introduction 5 11
- SME100 • Introduction 6 12
- Definitions 13
- SME100 • Introduction 8 14
- SME100 • Introduction 9 15
- SME100 • Introduction 10 16
- STREAMING MEDIA ENCODER 17
- S-video (YC) 18
- Balanced Audio Output 19
- Unbalanced Audio Output 19
- Connected RS-232 20
- Device Pins 20
- Modes 4 and 5 21
- Hardware Setup Overview 23
- SME100 Power Up Procedure 24
- SME100 Network 25
- Configuration 25
- Protocols Used for Streaming 26
- SME 100 sends data to 27
- Front Panel 28
- Operation 28
- select a submenu option 29
- User Presets 30
- Encode Presets 31
- Streaming Presets 32
- 00000 00000 37
- 0640 0480 37
- 064 064 37
- • Video / Audio 39
- • Video only 39
- 1 to 30. The default is 30 40
- Stream Config Menu 41
- Advanced Config Menu 42
- About the Auto Memory Submenu 44
- About the Auto Image Submenu 46
- Comm Settings Menu 49
- IP), subnet mask (SM), and 50
- GM) submenus (see figure 25) 50
- Settings menu 50
- Default Display Cycle 51
- Web-based User 52
- Interface Operation 52
- SME100 Media Players 53
- Live View Page 54
- Stop button 55
- Live View Page Notifications 56
- Installing Media Players 57
- Windows (see figure 32) 58
- Run to begin the download 59
- Next to 60
- OK (see figure 44) 64
- Next (see figure 45) 65
- Next (see figure 46) 65
- Install 66
- Using VLC 70
- Tools menu, select 71
- Video Effects tab and under 71
- Using QuickTime Media Player 72
- Status Page 73
- Configuration Page 75
- File Management Page 75
- Adding Directories 77
- Uploading Files 78
- Saving Files 78
- Managing Files Using FTP 79
- Backup / Restore Page 80
- Control Page 83
- 2a 2b 2c 2d 2e 2f 2g 2h 2i 84
- User and Input Presets 88
- Saving or recalling presets 89
- Renaming presets 89
- Web-based 90
- System Settings Page 91
- II) [RFC 1213] 93
- Encoder Settings Page 94
- Using Encoding Presets 102
- Using Streaming Presets 103
- Live View Settings Page 104
- Embedding the SME100 Stream 107
- Port Settings Page 109
- Advanced Settings Page 111
- Creating a Custom EDID 113
- Matrix Switcher Syncing 115
- Advanced Settings 117
- Disabling Sync to Matrix 118
- Security Page 119
- Firmware Upgrade Page 121
- Reset Page 122
- Communication and 123
- Software Overview 124
- Installing the software 125
- Running DataViewer 125
- Enter SIS 126
- Commands 126
- Responses 126
- USB tab 128
- Using Telnet 129
- SME100-initiated Messages 130
- Error Responses 131
- 06 / 14 / 11 – 13 : 40 : 03 136
- 137
- SME-100-HD/SD-00-02-3D 138
- E13 error 138
- View GMT offset 153
- Set daylight savings 153
- 192.168.254.254, and the 159
- 255.255.0.0 159
- Power Save Mode 161
- Reference 162
- Information 162
- Streaming Playback Methods 163
- 192.168.254.254 164
- Please enter a network URL 165
- (SAP) (see figure 108) 167
- Available Unicast Streams 170
- Available Multicast Streams 171
- IP Addressing 172
- Subnet Mask 173
- Port Number 173
- Choosing IP Addresses 173
- Response Messages 174
- Pull streaming (RTSP) 175
- SME100 Firmware Updates 176
- Browser Configuration 178
- Sites button and allow the 179
- Plugin Compatibility 182
- Player Compatibility 183
- Media Server Compatibility 183
- Mounting the SME100 184
- Contact Information 185
- Extron Warranty 185
Produits connexes et manuels pour Matériel Extron-electronics SME 100 User Guide
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.143 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels